Description: I’m marking this as “open box”, because I did buy this brand new and only tested it for the audio detect remote turn on, which worked like a charm and allowed me to move into my next items for the build, but ultimately I ended up getting the larger unit to divide out the sampling even greater for more detail. This sat around in the shop for the last 18/19 months or more on a shelf forgotten about. It’s gotten a couple of moved around the area scratches but other than that - it’s a perfect unit. I just tested it again and it works like a charm all the way around. I’ll include a link to download the original owners manual to the buyer, if you’re a bass lover then this is for you!!! Full description below Provides a strong clean signal: Your aftermarket processors and amplifiers need strong and clean input signals, whether getting them from a receiver's RCA outputs or a factory amp's speaker outputs. Wāvtech's linkD can produce up to 10 volts of output in either scenario, acting as a line driver using its RCA inputs or as a line output converter using the speaker-level inputs. Works with factory amps: Those speaker-level inputs can handle up to 40 volts, the equivalent of 400 watts, so you can use one in a premium system with a factory amplifier. This way you retain all your vehicle's factory audio options and warnings. The linkD's gain control and clip light help you keep the signal level under control and distortion-free. Product highlights: active 2-channel line driver/output converter designed to work with aftermarket and factory systems provides up to 10Vrms output preamp and speaker-level inputs selectable speaker-level input sensitivity (20V or 40V) via internal jumper auto turn-on via DC offset or audio detect built in gain control and clip light 12-volt turn-on lead output (remote in and out) speaker-level inputs feature load resistance to prevent factory stereo shut-down optional plug-in parallel load resistors available for vehicles like some newer Chrysler vehicles that need less resistance for the factory stereo's load-sensing to work (not included) wiring, fuse, and hardware not included with device 18-gauge power and ground leads and a 1-amp fuse recommended dimensions (not including terminals and jacks): 2-13/16"W x 1-1/8"H x 2-15/16"D
Price: 39.99 USD
Location: Portland, Oregon
End Time: 2024-12-02T22:44:57.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: wāvtech
Model: Wavtech linkD
