Wavtech link4 4ch LOC w/ Summing & Load Sense

Description: Product highlightsactive 4-channel line output converter and summing processor designed to work with factory systems wired remote and 16-foot cable included multi-function remote controls master volume, Aux volume, Ch3/4 volume, and source selection provides up to 10Vrms output per channel 3.5mm Aux and speaker-level inputs selectable speaker-level input sensitivity (20V or 40V) via internal jumper auto turn-on via DC offset or audio detect gain controls and clip lights select for 2 or 4 input channels 2-way signal summing with subwoofer signal pass-through aluminum chassis 12-volt turn-on lead output speaker-level inputs feature load resistance to prevent factory stereo shut-down optional plug-in parallel load resistors available for vehicles like some newer Chrysler vehicles that need less resistance for the factory stereo's load-sensing to work wiring, fuse, and hardware not included with device 18-gauge power and ground leads and a 1-amp fuse recommended dimensions: processor: 5-1/4"W x 1-1/8"H x 3-1/2"D (not including terminals and jacks) remote: 1-1/8"W x 1-1/2"H x 1-13/16"D warranty: 1 year What's in the box4-Channel line output converter 3 Phoenix terminals (installed) Multi-Function wired remote 5 meter RJ-45 remote cable 2 Mounting tabs (installed) Two ½" Screws Ground ring terminal Owner's manual About this itemWritten by Crutchfield's Buck PomerantzProvides a strong clean signal Your aftermarket processors and amplifiers need clean and robust line-level input signals, especially when getting them from a factory amplifier's speaker outputs. Wāvtech's link4 line output converter can produce up to 10 volts of output per channel — plenty enough for your aftermarket gear to work with. 4-channel summing processor The link4's four channels can get routed into a number of different configurations. Two input channels can be routed to four outputs, or four inputs could get summed together into one output pair. The link4 will work great in a factory system with separately powered tweeters and midrange drivers. Multi-function remote and auxiliary input An auxiliary input lets you conveniently plug in your phone or player to become a music source. The wired remote lets you select sources as well as control the master volume, the Aux level, and the independent channels 3/4, usually used for subs. Works with factory amps Those speaker-level inputs can handle up to 40 volts, the equivalent of 400 watts, so you can use one in a premium system with a factory amplifier. This way, you can retain all your vehicle's factory audio options and warnings. The link4's gain controls and clip lights help you keep the signal level under control and distortion-free.

Price: 159.95 USD

Location: Charlottesville, Virginia

End Time: 2024-02-27T04:11:13.000Z

Shipping Cost: 0 USD