Waveshare UPS HAT (E) for Raspberry Pi Bi-Directional Fast Charging 5V 6A Output

Description: Description UPS HAT (E) for Raspberry Pi, Supports 4× 21700 Li batteries (NOT included), Bi-Directional Fast charging, 5V 6A Output, Pogo Pins ConnectorUninterruptible Power Supply for Raspberry PiType-C Bi-Directional Fast charging, 5V 6A output. Supports charging and power output at the same time, onboard battery fuel gauge ICComes with online development resources and manualSAFETY CAUTIONSLi-ion and Li-po batteries are quite unstable. They may cause fire, personal injury, or property damage, if they're not properly recharged or used.Do not reversely connect the polarities when recharging or discharging the battery. Do not use inferior charger/charging panel to recharge the battery.Do not mix use old batteries with new ones, avoid using batteries of different brands.When buying Lithium battery, should always make sure the battery specification is compatible with the expansion board. Choose batteries from formal manufacturer, and ensure the batteries will work stably and safely by aging test.Lithium batteries have limited cycle life, they will also deteriorate as time goes by. Should be replaced with new ones when the batteries reaching their max cycle life, or working over two years, whichever comes first.Should be placed carefully and properly, keep it away from inflammables and explosives articles, away from children, avoid any safety accident caused by careless storage.Features at a glanceThe UPS HAT (E) is an uninterruptible power supply (UPS) expansion board specially designed for the Raspberry Pi series. Onboard battery fuel gauge IC, fast charging chip and high-power buck chip to realize higher power input and output. Supports monitoring the operating state of the HAT via the I2C interface.Adopts pogo pins connector design, compatible with Raspberry Pi 5 / 4B / 3B+Onboard Type-C port with bi-directional fast charging, supports multiple charging input / output protocols such as PD3.0, up to 40W charging powerOnboard battery fuel gauge IC for reading battery voltage, current, power, remaining capacity and other parameters.Supports I2C bus communication for monitoring the operating status of Type-C port and batteries in real timeSupports 4× 21700 Li batteries (NOT included), larger capacity and longer battery lifeOnboard high-power buck chip for stable 5V 6A power outputOnboard MCU management, supports detecting power connection and booting the Raspberry PiSupports displaying battery level on the system, easy to check the operating state of the HATComes with online development resources and manualSpecificationsControl busI2CBattery support21700 Li battery × 4 (in series, NOT included)Tyoe-C powerBi-directional input/output fast charging protocol, up to 40W charging powerOutput power5V 6ADimensions56 × 88mmMounting hole size3.0mmUninterruptible PowerIt is able to charge the batteries and provide power output at the same time from external power supplyAutomatically switch over to batteries output if external power supply is unavailable, keeps the system running without any trouble* for reference only, please refer to the Package Content for the detailed part listSupports 21700 large capacity Li battery,Longer Battery LifeOnboard warning indicators, easy to check if the battery is connected correctly* for reference only, the 21700 batteries are NOT includedDo not connect the recharger if the indicator lights up, otherwise the protection circuit will be broken down.Onbaord USB interfacesAdopts USB Type-C interface, supports multiple input/output protocols. Supports 5V, 9V, 12V, 15V, 20V input voltage, up to 40W charging power. Onboard USB Type-A interface for 5V power output, more convenient for powering other boards* for reference only, the Raspberry Pi 5 Official 27W USB-C power supply is NOT included.pogo pins connectorPowering the Raspberry Pi via pogo pins, without using any GPIO resource,compatible with Raspberry Pi 5 / 4B / 3B+, etc.Connecting to Raspberry Pi 5 Connecting to Raspberry Pi 4B* for reference only, the 21700 batteries are NOT includedReal time monitoringmonitoring the Type-C port and batteries voltage, current, power, and remaining capacity via I2CWhen the voltage dips too low, it is possible to save files properly and then shut down the system by software, to avoid any data lossSupports Battery level display anddetecting power connectionEasy to check the battery status in real-time, and automatically shutdown when the battery level is low. Supports detecting power connection and automatically rebooting the Raspberry PiOutline dimensionsResources & Services * Resources for different product may vary, please check the wiki page to confirm the actually provided resources.Selection guideModelDevice SupportBattery SupportfeaturePico-UPS-ARaspberry Pi Pico14500 Li-ion battery (NOT included)Provides power supply via pin headerPico-UPS-B600mAh 3.7V Li-po batteryProvides power supply via pin headerUPS HAT (C)Raspberry Pi Zero803040 Li-po battery 1000mAh 3.7VProvides power supply via Pogo pinsLi-ion Battery HAT14500 Li-ion battery (NOT included)UPS not supportedUPS HAT (B)Raspberry Pi 5/4B/3B+18650 Li battery × 2 (NOT included), up to 5A output current, with 8.4V battery chargerProvides power supply via Pogo pins, with 5V USB outputUPS HAT (E)21700 Li battery × 4 (in series, NOT included), up to 5V 6A output current, 40W bi-directional fast charging Type-C portProvides power supply via Pogo pins, with 5V USB outputUPS HATRaspberry Pi 4B/3B+18650 Li battery × 2 (NOT included), up to 2.5A output current, with 8.4V battery chargerProvides power supply via pin header, with 5V USB outputUPS HAT (D)21700 Li battery × 2 (in parallel, NOT included), up to 2.5A output current, with 5V Type-C port battery chargerProvides power supply via Pogo pins, with 5V USB outputLi-polymer Battery HAT3.7V 3000mAh 104060 Li-polymer battery, up to 2A output currentProvides power supply via pin header, UPS not supportedUPS Power ModuleJetson Nano18650 Li battery × 4 (NOT included), up to 2.5A output current, with 8.4V battery chargerProvides power supply via 6PIN cable, with OLED screenUPS Power Module (B)18650 Li battery × 4 (NOT included), up to 5A output current, with 8.4V battery chargerProvides power supply via Pogo pinsUPS Module 3SSuitable for the devices with Type-C power port18650 Li battery × 3 (in series, NOT included), up to 5V 5A output, with 12.6V battery chargerAdapting various interfaces via cablesUPS Module MiniSuitable for CM4-IO-WIRELESS-BASE-B base board, etc.10440 Lithium battery × 3 (in parallel, NOT included), up to 5V 2.5A outputProvides power supply via pads or pin header Package Content Weight: 0.127 kgThe 21700 batteries are NOT includedUPS HAT (E) x1Acrylic protection panel x1Screws pack x1123

Price: 41.27 USD

Location: 深圳

End Time: 2024-09-03T07:14:25.000Z

Shipping Cost: 0 USD