Description: The Truck and Auto Voltmeter Gauge accurately displays the temperature outside of your semi, truck or car. Teltek USA gauges are best in class and backed by over 20 years of design and manufacturing.ALL OF OUR GAUGES ARE AVAILABLE WITH RED OR BLUE LED & WITH CHROME OR BLACK BEZEL. ANY GAUGE FOR 2006 OR NEWER KENWORTH IS $4.00 MOREDetailsMade in the USA and secured with a Lifetime WarrantyRange 8.0 to 18.0 voltsConnects to 12 volts and displays to 0.1 voltsMounts in the standard 2 1/16" hole which fits most dashes. If 2 1/16" hole not available, one may purchase a mounting bracket or pillar.Easy installation instructions includedLifetime warranty, excluding abuseContentEnsure your electrical charging system is running strong in your truck with the digital precision of a superior auto and truck voltmeter gauge.This voltmeter display gauge gives you the ability to monitor the electrical status of your truck, RV, tractor or mobile home and get problems fixed before these problems can cause damage to your auto. Modern commercial design, choice of black or chrome bevels to match your interior and a sharp blue or red digital LED display add to the face of your auto's dash. Precision, accuracy and quality workmanship are inherent in this Teltek USA digital voltmeter sensor.The automotive digital voltmeter senor gauge measures voltage a spread from 8.0 to 18.0 volts. The reliable accuracy of the gauge pinpoints voltages to 0.1 volts. The large LED digital display is bright enough to be read during the bright of day, and then the display dims in the evenings for night driving.The truck, tractor or car's charging system requires a capable alternator to provide electric current which is shown in the automotive digital voltmeter display. This is how to use a voltmeter. If there’s a current deficit, the truck battery will provide the current needed until the battery goes dead. The voltmeter gauge will display the level of current in the electrical system. Therefore, if there is an electrical problem, the precision voltmeter will show a drop in volts.For most trucks, the voltmeter should read between 14 and 14.5 volts when the truck engine is running. This tells you the truck’s electrical system is running at a healthy level. If the display of the voltage gauge drops below 12.5, your truck is probably running of battery power and you should find a truck mechanic as soon as possible. The voltmeter may drop below 14 when the electrical system is working fine if the electrical system is being over taxed by the truck’s other systems. This could happen if the windshield wipers, lights, heater, defrost system, radio are all working while the truck is sitting in idle. No worries though, hit your truck accelerator and the digital precision volt meter display will jump back up to normal levels.Another potential problem occurs when your automotive voltmeter display displays a reading above 15 volts. This indicates the electrical system is overcharging due to a problem with the voltage regulator. Taking the truck to a mechanic will help prevent damage to electrical system.In addition to a digital volt meter, an ammeter display also gives clues regarding the health of your truck’s electrics. A metaphor for the relationship between the voltmeter gauge and the ammeter gauge would be comparing rate of water running to the amount of water running through a pipe. Both auto truck gauges can help you take good care of your truck, car, RV mobile home or tractor.Our gauges are made by Teltek USA, over 20 years in business and the most respected manufacturer of commercial aftermarket gauges and meters for semi trucks and autos Compatible with: Chevy, Dodge, Ford, Freightliner, GMC, Hino, International, Izuzu, Kenworth, Mack, Mitsubishi, Peterbilt, Sterling, Universal, Volvo, and Western StarNOTE: 2006 AND NEWER KENWORTH IS NOT COMPATABLE BUT ARE AVAILABLE FOR ADDITIONAL $4.00Synonymstractor volt metersemi truck voltmeter sensorcar aftermarket voltmeter voltmeter gauge digital voltmeter gauge voltmeter for car digital voltmeter for car
Price: 89 USD
Location: Cockeysville, Maryland
End Time: 2025-01-08T03:20:43.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 14 Days
Refund will be given as: Money back or exchange (buyer's choice)
Manufacturer Part Number: SKU 146
Surface Finish: Bezel: Black, LED: Red
Country/Region of Manufacture: United States
Brand: Teltek
Warranty: Yes
Part Type: Voltmeter