LENEL LNL-CK Command Keypad Command Reader Good Working Condition

Description: The LNL-CK Lenel Command Keypad integrates a 32-character backlit LCD display with a 16-position keypad and a reader port. The command keypad serves as a command reader, a reader from which user commands can be issued to execute local I/O functions. Reader command programming is accomplished using the OnGuard System Administration application. The LNL-CK display indicates time in either 12 or 24-hour clock format. The format is automatically chosen based on the regional settings of the computer on which the Communication Server is running. The LNL-CK display also provides command status and other text feedback during reader operations. For example, when performing the Extended Held Open command, the LNL-CK displays the countdown time before the Held Open time is reached, as well as basic intrusion arm/disarm functions. The LNL-CK communicates with the Lenel Intelligent System Controller ISC either through direct, multidrop, 2-wire RS-485 communication to the ISC, or through a reader port of a Lenel Dual Reader Interface Module LNL-1320. The LNL-CK may be configured in one of three ways: as a stand-alone RS-485 device, as an alternate reader to a primary reader, or as a reader device connected to the Wiegand input of a LNL-1320. In any of these modes, an optional reader with a Data1/Data0 or clock/data output may be connected to the LNL-CK to provide Card Only, Card or PIN, or Card and PIN capability. FEATURES: 32-character backlit LCD display 16-position keypad with 4 function keys Supports all approved for use reader technologies from Lenel that communicate using Data1/Data0 or clock/data communication Arm, Disarm, Bypass and Force Arm alarm mask groups Extended Held Open Time via Command Keypad with feedback Reader command support Works with all Lenel Intelligent System Controllers (LNL-500, LNL-1000, LNL-2000) Supports reader mode changes by Timezone control Supports PIN mode on LNL-CK keypad. With optional reader, all other modes are also supported Ability to adjust backlight on/off times Flash upgradable firmware Built-in DIP switch selectable RS-485 termination PRODUCT DIMENSIONS Height: 6.75" Width: 5" Depth: 1" Weight: 0.88lb Pulled out of a working system. Used condition, works as intended. May be slight differences in unit you receive. Our items are packaged securely then shipped FAST, same or next business day. Thanks for looking.

Price: 39.99 USD

Location: Easley, South Carolina

End Time: 2025-01-23T12:57:28.000Z

Shipping Cost: N/A USD