Indiana Jones Staff of Ra Metal Fittings

Description: This listing is for the high quality screen accurate metal staff fittings to make the Staff of Ra prop replica. These fittings include both the top and bottom metal staff fittings. You can choose between the Antique Gold or Polished Gold finishes on the metal staff fittings. These Staff of Ra metal fittings work with both the Raven Bar and the Imam versions of the Headpiece to the Staff of Ra that we offer in our shop and will also work with our older Norank version of the Ra Headpiece. There is no guarantee that it will work with any other headpieces. You should be able to find a wooden dowel shaft at a local hardware store. Currently, the longest readily available wooden shaft that we were able to find is 72 inches long in the .75 inch diameter. You will need to add a slight cone shape to one end where the top of the staff fitting goes and drill a 7/32 inch hole in the other end where the bottom staff fitting goes. https://www.lowes.com/pd/Madison-Mill-Round-Wood-Poplar-Dowel-Actual-72-in-L-x-0-75-in-dia/1000152145 Any additional item(s) seen in the pictures are sold separately including the Headpiece to the Staff of Ra and the Staff Display Base. We also sell a display base for the complete Staff of Ra so be sure to take a look at that. The Staff Display Base is intended to go on your floor and hold the complete Staff of Ra. However, you if you wanted to put the display base on a pedestal, cabinet, shelf, or something else like that then you could get a shorter wooden staff section and display all the parts of the complete Staff of Ra in a more compact fashion. Please note: due to the manufacturing tolerances of the casting and plating process the headpiece adaptor needed to be made so that the fit is slightly loose inside the headpiece. This is solved by using a couple of flat style toothpicks and breaking off the fat ends and inserting those into the sides of the slot so that there is one on each side of the adaptor tab. Then you can press the staff adapter and the headpiece together and it will be a tight fit. The first time you press them together the fit will be very tight. Over time with repeatedly taking them apart and putting them back together the connection will start to loosen up again. If/when the connection becomes too loose then just replace the toothpicks. Overall this method is better than any other options because it will create a tight fit and the wear-n-tear parts (toothpicks) can easily be replaced at a negligible cost. Feel free to send us a message if you have any questions. We also have a short video that shows the process. The Headpiece to the Staff of Ra was a much sought-after golden/bronze medallion which was originally designed as a means to reveal the location of the Ark of the Covenant. The headpiece included a dire warning to not disturb the Ark of the Covenant. The headpiece was designed to be placed atop the Staff of Ra and used in the Map Room at Tanis to reveal the location of the Well of the Souls, the final resting place of the Ark. Once the staff was in place and the sun rose to the correct position then a beam of light pointed to the spot where Indy was to dig and discover the Ark. According to the information I have, the original Staff of Ra without the headpiece was 85 inches (216cm) tall. ⛊ Don't forget to check out our other Indiana Jones items We have been making props since 2006 and started sharing our work with people from all over the world in 2010. We have sent out quite a lot of props and consistently receive positive feedback. We stand behind the quality of our work to ensure that you get the best product we can give you. If you have any questions, before or after your purchase, please feel free to contact us. We are here to help and want to make sure that all questions are answered and that every customer is happy with their purchase.Disclaimer: Dark Matter Forge, Dark Matter Props, DarkMatterProps.com, it owners, managers, and the person or persons financially, physically, partially or wholly involved in the intended operations of Darkmatterprops.com and any other related social media and/or retail sites can and will hereby be referred to in the plural sense such as "us," or "we". We are not liable for any damages, direct or coincidental, to any person or property, resulting from misuse of the products we sell. Misuse is defined as using our products for any purpose other than that which is described "for decorative purposes only" whether there are any alternative purposes expressed or implied. We are not endorsed by Marvel Entertainment, DC comics, Darkhorse comics, Lucasfilms, Walt Disney Studios, BVS Entertainment, Universal Studios, Warner Brothers Studios, Bethesda Softworks, or any other entertainment company or their affiliates are not authorized. We are not affiliated in any way, nor do we by fact or inference imply to hold any rights or authorization, rights of association or sponsorship or endorsement of the use of any copyrights or trademarks as held by any individuals, or companies mentioned or pictured in association with any offer, including, but not limited to the aforementioned entities or their affiliates. Furthermore, ZeniMax Media Inc. is the owner of the copyrights and trademarks related to the ?Fallout? video game franchise. These copyrights and trademarks include "Fallout" "Fallout: New Vegas" "Vault-Tec" "Vault Boy" "War, War Never Changes." "Nuka Cola" (Serial Numbers: 85818163,77841625, 77934276, 77841630, 77618670, 77979092, 77976725, 77976663, 85075201). We do not have permission to use any trademarks or copyrighted materials. We are not aware of any infringements against copyright holders existing on this web space. If it is believed that we have violated any agreements please contact us and our webmaster will make necessary revisions as soon as possible, granted your concerns are of a valid and verifiable nature.The products we make are our original creations, and are not to be construed as perfect replicas of any props or artistic creations from any film, comic, and/or game. Any exact likeness to a patented or copyrighted object relating to Iron Man, X-Men, Fallout, or any other movie, comic, and/or game is strictly unintentional. We use our own design templates. We may sometimes refer to our props as "screen accurate". This term is offered at face value, and should not be interpreted in any way such as to contradict any of the above statements.

Price: 40.7 USD

Location: Richmond, Texas

End Time: 2024-11-27T20:35:01.000Z

Shipping Cost: 11.7 USD