HELIX M SIX 6-Channel Amplifier, 6x100w or 3x200w RMS @ 4 Ohm, Class D Brand New

Description: HELIX M SIXPress & awardsTechnologiesAmplifier ClassInputsHardware Technologies Additional FeaturesOne for all – no matter if 3-way, 2-way or subwoofer application, the 6-channel amplifier M SIX will always be the right choice.With generously 100 Watts RMS per channel into both 4 Ohms and 2 Ohms load this amp really gets your speaker cones going despite its super-compact dimensions. On the other hand the M SIX stays totally cool thanks to its highly efficient Class D design topology. And even bridged configurations are possible, delivering up to 3 x 200 Watts RMS of clean and undistorted output power.In addition a comprehensive and stunningly practical feature set leaves nothing to be desired. And finally the perfect sound tuning is no big deal thanks to its integrated crossover with all its setup options.FeaturesSmall footprint Class D amplifier with high output power of 100 Watts RMS @ 4 and 2 Ohms loadStart-Stop capability down to 6V supply voltage6-channel lowlevel inputIntegrated, active crossover with highpass, lowpass, bandpass and subsonic“Input mode” switch for channel E & F for flexible input signal routingSMD (Surface Mounted Device) manufacturing technology combines minimum space requirement with maximum reliabilityExclusive, extremely compact and clean design with illuminated HELIX-logo and low heat dissipation thanks to extraordinary efficiency Special features:Start-Stop capabilityThe switched power supply of the HELIX M SIX assures operation even if the battery’s voltage drops down to 6 Volts during engine crank.Technical dataOutput power RMS ≤ 1% THD+N - @ 4 Ohms6 x 100 Watts- @ 2 Ohms6 x 100 Watts- @ 1 Ohm-- bridged @ 4 Ohms3 x 200 Watts- bridged @ 2 Ohms- Max. output power per channel*Up to 130 Watts RMS @ 4 / 2 OhmsAmplifier technologyClass DInputs6 x RCA / Cinch1 x Remote InInput sensitivityRCA / Cinch 0.5 - 6 VoltsInput impedance RCA / Cinch20 kOhmsInput impedance highlevel- Outputs6 x Speaker outputOutput voltage RCA / Cinch- Signal converter for digital input- Frequency response10 Hz - 30,000 HzBass boost- Highpass15 Hz - 4,000 Hz adjustableLowpass40 Hz - 4,000 Hz adjustableBandpass15 Hz - 4,000 Hz adjustableSubsonic / HPF15 Hz - 4,000 Hz adjustablePhase- Slope high- / lowpass12 dB/Oct.Slope subsonic / lowpass- Signal-to-noise ratio digital input- Signal-to-noise ratio analog input98 dB (A-weighted)Distortion (THD)0.05 %Damping factor100Operating voltage10.5 - 16 Volts (max. 5 sec. down to 6 Volts)Idle current1,550 mAOperating temperature range-40° C to +70° CFuse2 x 35 A Maxi-fuse (APX)Power ratingDC 12 V ⎓ 80 A max.Additional featuresActive, adjustable crossover, subsonic input mode switch channel E / F, subsonic, Start-Stop capabilityDimensions (H x W x D)50 x 320 x 154 mm /2.00 x 12.60 x 6.06”* In typical multi-channel applications (2- / 3-way system + rear + subwoofer)Scope of delivery1 x Amplifier HELIX M SIX1 x Mounting material1 x Instruction manual

Price: 499 USD

Location: Yakima, Washington

End Time: 2024-12-16T04:14:18.000Z

Shipping Cost: 0 USD