Diy Co2 Generator System Kit for Aquarium Plants

Description: The DIY CO2 Kit provides an excellent method of deploying the citric acid / baking soda solution to generate CO2 for plants' growing in the aquarium. Easy to operate and designed for low cost planted tank use.Highlight: Much easier and safer to control. A quick reaction test tube simplifies the procedure and achieves a fast reaction. The unique design of acid absorbing ball makes it more convenient to control acid consumption. Besides, there is a simple pressure relief valve under the pressure gauge.Durable: Our tubing is highly resistant to pressure, and the tubing between the two caps is even acid- and hydrolysis-resistant. ABS engineering plastic caps with professional stable structural design ensure that they are non-deformable, anti-wear and anti-aging.Our CO2 Generator Kit includes most accessories. You only need to prepare yourself: 2 additional carbonated beverage bottles (preferably for 2L), e.g. Coke or Sprite; reaction materials: baking soda and citric acid; check valve and CO2 diffuser.* Tips: 1. The needle valve is only used to adjust the output volume, It only need to be adjusted once. Daily switching can be controlled by the white on/off valve. The reason for this is to ensures the gas output is stable. 2. DO NOT use bottles other than carbonated beverage bottles. Product Description With the help of this test tube you will find the reaction so easy and fast.With acid absorption ball, it is easier to control acid consumption and solve problems such as acid accumulation, unstable pressure, high-pressure value, etc. Safety Valve: Safe to use with the simple pressure relief valve.Cap: Reinforced beam structure design. Engineering grade ABS material. Pressure-resistant and no deformation or breakage worries. Highly resistant to pressure. No cracking. The tube between the two caps is even acid- and hydrolysis-resistant. This data is based on an raw material ratio of 200g of baking soda. Note: the ideal gas flow rate: ≤ 1 bubble per second, the higher the flow rate, the faster the raw material consumption will be and the shorter the usage time. DIY CO2 SYSTEM KIT FOR NANO TANKS Citric acid + baking soda + water=CO2 Ensure to use carbonated beverage bottles, such as Coca-Cola bottles, 2L is the best.After closing the micro-adjustment valve or the on/off valve, the diffuser does not stop bubbling immediately, because the gas in the tubing still needs a few minutes to run out.The micro-adjustment valve has two knobs, the outer one is the micro-adjustment knob and the inner one is the locking knob. Make sure the locking knob is loose before adjusting the micro-adjustment knob.Better to only use the on/off valve for daily opening and closing to prevent frequent adjustment of the micro-adjustment valve each time. Note: This product does not include: raw materials (citric acid and baking soda), plastic bottle, diffuser, and check valve.

Price: 27.82 USD

Location: Salem, Virginia

End Time: 2024-12-29T18:28:39.000Z

Shipping Cost: 0 USD