Capo JKMAX Rear Axle Reinforced Beam Expansion Kit 1/8 Crawler rc car

Description: The JKMAX rear axle reinforced beam conversion kit consists of a combination of five parts: the buckle seat and the beam. Most real vehicle axle reinforcement beams are split weld modifications, and the assembly is fastened with M3 screws and nuts. Functionality and extended installation: The left and right axle bridges and the tie rods of the rear axle are connected as a whole, and the rigidity of the rear axle is strengthened, so that when the vehicle is turning and climbing, the vehicle overcomes the bleed force caused by different twisting positions and strengthens the axle screws. Fastening ability. Also used as an extension to the following retrofit kits: As the first fixed beam that can be remotely unlocked and locked by the climbing car anti-roll bar modification. As the impact base of the rear suspension barrel type limit buffer modification. Shipping: If the ePacket is available to your country, we will ship by ePacket to make sure you can receive the order at the soonest. Normally, order will be received within 12-25 days. For other order, we will ship by China Post or China Parcel. If you have any special requirement about shipment, please send message to us. Feedback: If you have met any problem with your order, please do not leave us negative feedback at first, but contact us. Please be assured that we will do the best to help you resolve any problem. If you are satisfied with your order, please leave us five stars positive feedback. Products: In addition, we have 99% of losi and Baja parts in stock, if you did not find out the parts that you want on our website, please do not hesitate to contact us and we will have a check for you.

Price: 44 USD

Location: China

End Time: 2024-08-05T12:35:22.000Z

Shipping Cost: 7 USD