BLUE SKY SOLAR BOOST SB3024iL MPPT CHARGE CONTROL 40A/12V

Description: BLUE SKY SOLAR BOOST 3024iL MPPT CHARGE CONTROL 40A/12V - 30A/24V NO DISPLAY Blue Sky Energy Solar Boost 3024iL (No Display) 40Amp/12V - 30Amp/24V MPPT Charge Controller Get Improved Performance From Your PV Modules And BatteriesPatented MPPT Technology Increases Charge Current up to 30% Or More!40 Amp 12V or 30 Amp 24V rating supports a wide range of applicationsAuxiliary Output Serves As 20 Amp Load Controller Or 2 Amp Battery ChargerIPN Network Interface Coordinates Multiple Controllers & Shares Optional Battery Temperature Sensor & DisplayOptional IPN-ProRemote Display Provides Complete Charge Control & Battery System Monitoring, Eliminating The Need for A Separate Battery Monitor Device3-Stage Charge Control With Filtered PWM Output & Auto/Manual Equalization Improves Battery Performance & LifeMPPT Power Converter Can Charge 12 V Batteries From 24 V PV ModulesDurable Powder Coat Finish & Conformal Coated Electronics Resist CorrosionFull 24 Month Limited Warranty, Optional Extended Coverage Available Maximum Power Point Tracking Increases Charge Current Up To 30% Or More! Solar Boost 3024iL's advanced fully automatic 3-stage charge control system will properly charge flooded lead-acid, AGM and GEL batteries resulting in improved battery performance with less maintenance. The dual 30/40 amp rating will deliver at up to 30 amps in 24 volt systems, or up to 40 amps in 12 volt systems. An automatic or manual equalize function is also provided to periodically condition flooded lead-acid batteries. To further enhance versatility, a user configurable auxiliary output and Blue Sky Energy's advanced IPN™ network interface are also included. Blue Sky Energy’s advanced Integrated Power Net™, or IPN Network, allows up to 8 IPN capable charge controllers to communicate with each other and operate as a single machine rather than separate charge controllers. The IPN network also allows networked controllers to share an optional battery temperature sensor and remote display. The IPN network does not require a display or other special hardware to operate. The user configurable auxiliary output can serve as either a 20 amp load controller, or as a 2 amp auxiliary battery charger. The load control feature can be used to limit excessive battery discharge in unattended remote systems, whereas the auxiliary battery charge feature is ideal for charging a separate battery such as the engine battery in an RV. The auxiliary output can also provide fully adjustable dusk to dawn lighting control. How Do Solar Boost Charge Controllers Increase Charge Current? Solar Boost controllers increase charge current by operating the PV module in a manner that allows the module to produce all the power it is capable of. A conventional charge controller simply connects the module to the battery when the battery is discharged. When the 75W module in this example is connected directly to a battery charging at 12 volts its power production is artificially limited to about 53 watts. This wastes a whopping 22 watts or nearly 30% of the available power! Patented MPPT technology used in Solar Boost controllers operates in a very different fashion. The Solar Boost controller continually calculates the module’s maximum power voltage, in this case 17 volts. It then operates the module at its maximum power voltage to extract maximum power. The higher power extracted from the module is then provided to the battery in the form of increased charge current. In conditions where extra PV power is not available, Solar Boost controllers will operate as a conventional controller with very low voltage drop. * see product images for specifications Hurricane Wind Power 2019Corporate America Today2019 Best Off-Grid Renewable Energy Product Supplier - USAUP TO 50% DISCOUNTSTOP BRANDSPaymentShippingReturnsPaymentShippingReturns We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! We offer Fast shipping on all orders! Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement. If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 14 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. See our other itemsThank you for visiting our Ebay store!Blue Sky Energy Solar Boost 3024iL (No Display) 40Amp/12V - 30Amp/24V MPPT Charge Controller Get Improved Performance From Your PV Modules And Batteries ---Patented MPPT Technology Increases Charge Current up to 30% Or More! ---40 Amp 12V or 30 Amp 24V rating supports a wide range of applications ---Auxiliary Output Serves As 20 Amp Load Controller Or 2 Amp Battery Charger ---IPN Network Interface Coordinates Multiple Controllers & Shares Optional Battery Temperature Sensor & Display ---Optional IPN-ProRemote Display Provides Complete Charge Control & Battery System Monitoring, Eliminating The Need for A Separate Battery Monitor Device ---3-Stage Charge Control With Filtered PWM Output & Auto/Manual Equalization Improves Battery Performance & Life ---MPPT Power Converter Can Charge 12 V Batteries From 24 V PV Modules ---Durable Powder Coat Finish & Conformal Coated Electronics Resist Corrosion ---Full 24 Month Limited Warranty, Optional Extended Coverage Available Maximum Power Point Tracking Increases Charge Current Up To 30% Or More! Solar Boost 3024iL's advanced fully automatic 3-stage charge control system will properly charge flooded lead-acid, AGM and GEL batteries resulting in improved battery performance with less maintenance. The dual 30/40 amp rating will deliver at up to 30 amps in 24 volt systems, or up to 40 amps in 12 volt systems. An automatic or manual equalize function is also provided to periodically condition flooded lead-acid batteries. To further enhance versatility, a user configurable auxiliary output and Blue Sky Energy's advanced IPN™ network interface are also included. Blue Sky Energy’s advanced Integrated Power Net™, or IPN Network, allows up to 8 IPN capable charge controllers to communicate with each other and operate as a single machine rather than separate charge controllers. The IPN network also allows networked controllers to share an optional battery temperature sensor and remote display. The IPN network does not require a display or other special hardware to operate. The user configurable auxiliary output can serve as either a 20 amp load controller, or as a 2 amp auxiliary battery charger. The load control feature can be used to limit excessive battery discharge in unattended remote systems, whereas the auxiliary battery charge feature is ideal for charging a separate battery such as the engine battery in an RV. The auxiliary output can also provide fully adjustable dusk to dawn lighting control. How Do Solar Boost Charge Controllers Increase Charge Current? Solar Boost controllers increase charge current by operating the PV module in a manner that allows the module to produce all the power it is capable of. A conventional charge controller simply connects the module to the battery when the battery is discharged. When the 75W module in this example is connected directly to a battery charging at 12 volts its power production is artificially limited to about 53 watts. This wastes a whopping 22 watts or nearly 30% of the available power! Patented MPPT technology used in Solar Boost controllers operates in a very different fashion. The Solar Boost controller continually calculates the module’s maximum power voltage, in this case 17 volts. It then operates the module at its maximum power voltage to extract maximum power. The higher power extracted from the module is then provided to the battery in the form of increased charge current. In conditions where extra PV power is not available, Solar Boost controllers will operate as a conventional controller with very low voltage drop. * see product images for specifications BLUE SKY SOLAR BOOST 3024iL MPPT CHARGE CONTROL 40A/12V - 30A/24V NO DISPLAY Blue Sky Energy Solar Boost 3024iL (No Display) 40Amp/12V - 30Amp/24V MPPT Charge Controller Get Improved Performance From Your PV Modules And BatteriesPatented MPPT Technology Increases Charge Current up to 30% Or More!40 Amp 12V or 30 Amp 24V rating supports a wide range of applicationsAuxiliary Output Serves As 20 Amp Load Controller Or 2 Amp Battery ChargerIPN Network Interface Coordinates Multiple Controllers & Shares Optional Battery Temperature Sensor & DisplayOptional IPN-ProRemote Display Provides Complete Charge Control & Battery System Monitoring, Eliminating The Need for A Separate Battery Monitor Device3-Stage Charge Control With Filtered PWM Output & Auto/Manual Equalization Improves Battery Performance & LifeMPPT Power Converter Can Charge 12 V Batteries From 24 V PV ModulesDurable Powder Coat Finish & Conformal Coated Electronics Resist CorrosionFull 24 Month Limited Warranty, Optional Extended Coverage Available Maximum Power Point Tracking Increases Charge Current Up To 30% Or More! Solar Boost 3024iL's advanced fully automatic 3-stage charge control system will properly charge flooded lead-acid, AGM and GEL batteries resulting in improved battery performance with less maintenance. The dual 30/40 amp rating will deliver at up to 30 amps in 24 volt systems, or up to 40 amps in 12 volt systems. An automatic or manual equalize function is also provided to periodically condition flooded lead-acid batteries. To further enhance versatility, a user configurable auxiliary output and Blue Sky Energy's advanced IPN™ network interface are also included. Blue Sky Energy’s advanced Integrated Power Net™, or IPN Network, allows up to 8 IPN capable charge controllers to communicate with each other and operate as a single machine rather than separate charge controllers. The IPN network also allows networked controllers to share an optional battery temperature sensor and remote display. The IPN network does not require a display or other special hardware to operate. The user configurable auxiliary output can serve as either a 20 amp load controller, or as a 2 amp auxiliary battery charger. The load control feature can be used to limit excessive battery discharge in unattended remote systems, whereas the auxiliary battery charge feature is ideal for charging a separate battery such as the engine battery in an RV. The auxiliary output can also provide fully adjustable dusk to dawn lighting control. How Do Solar Boost Charge Controllers Increase Charge Current? Solar Boost controllers increase charge current by operating the PV module in a manner that allows the module to produce all the power it is capable of. A conventional charge controller simply connects the module to the battery when the battery is discharged. When the 75W module in this example is connected directly to a battery charging at 12 volts its power production is artificially limited to about 53 watts. This wastes a whopping 22 watts or nearly 30% of the available power! Patented MPPT technology used in Solar Boost controllers operates in a very different fashion. The Solar Boost controller continually calculates the module’s maximum power voltage, in this case 17 volts. It then operates the module at its maximum power voltage to extract maximum power. The higher power extracted from the module is then provided to the battery in the form of increased charge current. In conditions where extra PV power is not available, Solar Boost controllers will operate as a conventional controller with very low voltage drop. * see product images for specifications Hurricane Wind Power 2019Corporate America Today2019 Best Off-Grid Renewable Energy Product Supplier - USAUP TO 50% DISCOUNTSTOP BRANDSSee our other itemsPayment We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Shipping We offer Fast shipping on all orders! Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.Returns If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 14 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. Thank you for visiting our Ebay store! Blue Sky Energy Solar Boost 3024iL (No Display) 40Amp/12V - 30Amp/24V MPPT Charge Controller Get Improved Performance From Your PV Modules And BatteriesPatented MPPT Technology Increases Charge Current up to 30% Or More!40 Amp 12V or 30 Amp 24V rating supports a wide range of applicationsAuxiliary Output Serves As 20 Amp Load Controller Or 2 Amp Battery ChargerIPN Network Interface Coordinates Multiple Controllers & Shares Optional Battery Temperature Sensor & DisplayOptional IPN-ProRemote Display Provides Complete Charge Control & Battery System Monitoring, Eliminating The Need for A Separate Battery Monitor Device3-Stage Charge Control With Filtered PWM Output & Auto/Manual Equalization Improves Battery Performance & LifeMPPT Power Converter Can Charge 12 V Batteries From 24 V PV ModulesDurable Powder Coat Finish & Conformal Coated Electronics Resist CorrosionFull 24 Month Limited Warranty, Optional Extended Coverage Available Maximum Power Point Tracking Increases Charge Current Up To 30% Or More! Solar Boost 3024iL's advanced fully automatic 3-stage charge control system will properly charge flooded lead-acid, AGM and GEL batteries resulting in improved battery performance with less maintenance. The dual 30/40 amp rating will deliver at up to 30 amps in 24 volt systems, or up to 40 amps in 12 volt systems. An automatic or manual equalize function is also provided to periodically condition flooded lead-acid batteries. To further enhance versatility, a user configurable auxiliary output and Blue Sky Energy's advanced IPN™ network interface are also included. Blue Sky Energy’s advanced Integrated Power Net™, or IPN Network, allows up to 8 IPN capable charge controllers to communicate with each other and operate as a single machine rather than separate charge controllers. The IPN network also allows networked controllers to share an optional battery temperature sensor and remote display. The IPN network does not require a display or other special hardware to operate. The user configurable auxiliary output can serve as either a 20 amp load controller, or as a 2 amp auxiliary battery charger. The load control feature can be used to limit excessive battery discharge in unattended remote systems, whereas the auxiliary battery charge feature is ideal for charging a separate battery such as the engine battery in an RV. The auxiliary output can also provide fully adjustable dusk to dawn lighting control. How Do Solar Boost Charge Controllers Increase Charge Current? Solar Boost controllers increase charge current by operating the PV module in a manner that allows the module to produce all the power it is capable of. A conventional charge controller simply connects the module to the battery when the battery is discharged. When the 75W module in this example is connected directly to a battery charging at 12 volts its power production is artificially limited to about 53 watts. This wastes a whopping 22 watts or nearly 30% of the available power! Patented MPPT technology used in Solar Boost controllers operates in a very different fashion. The Solar Boost controller continually calculates the module’s maximum power voltage, in this case 17 volts. It then operates the module at its maximum power voltage to extract maximum power. The higher power extracted from the module is then provided to the battery in the form of increased charge current. In conditions where extra PV power is not available, Solar Boost controllers will operate as a conventional controller with very low voltage drop. * see product images for specifications

Price: 310 USD

Location: Roanoke, Virginia

End Time: 2024-02-14T19:55:39.000Z

Shipping Cost: N/A USD