Description: The Series 250 flow sensor from Badger Meter® features a six-bladed impeller design with a proprietary non-magnetic sensing mechanism, mounted in a cast bronze housing, with female NPT threads. The unique impeller design is less prone to be fouled by waterborne debris. The forward curved shape coupled with the absence of magnetic drag provides improved operation and repeatability even at lower flow rates. This is especially true where the impeller is exposed to metallic or rust particles found in steel or iron pipes. As the liquid flow turns the impeller, a low impedance square wave signal is transmitted with a frequency proportional to the flow rate. The signal can travel up to 2000 ft (610 m) between the flow sensor and the receiving unit without the need for amplification. All sensors except irrigation versions are supplied with 20 ft (610 cm) of 2-conductor 20 AWG shielded UL type PTLC 221° F (105° C) cable and meet CE standards for noise immunity and susceptibility. FEATURES • Sensor electronics easily removed from the tee • Impeller, bearing and shaft are easily replaced in the field, without changing calibration • Two-wire sensor. Power and signal transmit on a single pair of wires, up to a distance of 2000 ft (610 m) • Digital signal easily interfaced with transmitters, monitors or PLCs APPLICATIONS • Energy management and building management systems • BTU sub-metering systems • Cooling tower treatment systems
Price: 349.3 USD
Location: Henderson, Nevada
End Time: 2025-02-12T22:56:07.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Maximum Flow Rate: 15 Fps
MPN: 250BR1505-1211
Restricted Sale Item Code: A9
Weight: 7.3000
Brand: Impeller
Flow Meter Type: non-magnetic sensing mechanism
ItemPackageQuantity: 1
Unit Type: Unit
Length: 10.500
Port Diameter: 1 1/2 in
Minimum Flow Rate: 0.3 Fpm
Features: Electronic Flowmeter, Product Type Metallic Tee Type Flow Sensor,
Unit Quantity: 1
Country/Region of Manufacture: United States
Width: 8.000
