Description: Adjust your FPS on the fly with this adjustable spring tuning system. Works by utilizing a stem with notches where each notch is a different boosting level. Once you have your blaster modded how you like, you can then mark the notches with their FPS numbers for easy recall. The power of this system ranges from my highest standalone FPS cap (High) to just a bit above my lowest standalone FPS cap (Ultra Low) for a huge variety in output from this blaster, all in one unit! The included bolt and nut is used to set the desired level of power but a hex key can also be substituted for quick and easy power level changing as the holes are oriented to be top to bottom so its unlikely to fall out, especially with a stock on. ATTRIBUTION: Designed by Transmogrification Labs. INCLUDES: 1x Adjustable FPS Tuning Spring Spacer System with necessary hardware. VERSION INFO: Currently shipping version 1.0. INSTALLATION: Replace the stock cap from the end of the stock tube with this one. Unscrew the bolt in the spacer system and push/pull the stem until the desired amount of compression is achieved, then re-insert the bolt. MATERIAL NOTES: This product is printed in PETG material which offers superior thermal resistance and increased durability compared to PLA products. PETG has a higher glass transition temperature of 80°C whereas PLA is 60-65°C. For PLA, this is within range of the temperatures that often occur inside a vehicle during summertime so items made from PLA may end up warping in those situations. The same issue can possibly occur from exposure to direct sunlight if the temperature is high enough. PETG has a much higher glass transition temperature however so you are very unlikely to ever experience issues with it warping in addition to it just being stronger in general. PETG products do come at a higher cost than the same product in PLA because PETG takes longer to print and also requires more time to clean up after printing but the result is a very high-quality product. DISCLAIMER: All of my products are printed and tested with the utmost attention to detail. Despite this, I am NOT responsible for any damage incurred to you or your blasters through the use of any of these parts by themselves or in combination with others. It is up to you to keep yourself and your blasters in functioning condition. Some prints may have slight imperfections as is common to all 3D printing (especially for PETG). These slight imperfections will not interfere with mechanical function or integrity/strength. B-STOCK: B-stock items are items that are only defective in appearance and are offered at a discount for this reason. They should function like the normal product unless otherwise specifically noted in the listing. Powered by ExportYourStore.com
Price: 18.18 USD
Location: Huntsville, Alabama
End Time: 2023-11-18T23:24:36.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Return policy details:
Material: PETG
Brand: Transmogrification Labs
Type: Toys
MPN: PETG Adjustable FPS Tunin e2e6c59d
Available Variations
Color: Black
Price: 18.18 USD
Available Quantity: 1
Quantity Sold: 0
Color: Blue
Price: 18.18 USD
Available Quantity: 1
Quantity Sold: 0
Color: Grey
Price: 18.18 USD
Available Quantity: 1
Quantity Sold: 0
Color: Orange
Price: 18.18 USD
Available Quantity: 2
Quantity Sold: 1
Color: Red
Price: 18.18 USD
Available Quantity: 1
Quantity Sold: 0
Color: White
Price: 18.18 USD
Available Quantity: 1
Quantity Sold: 0
Color: Special AF Dark Grey
Price: 18.18 USD
Available Quantity: 1
Quantity Sold: 0
