5KG ELEGOO Water Washable Resin 3D Printer Resin LCD Resin 405nm Ceramic Grey

Description: ELEGOO Water Washable Photopolymer Resin is compatible with the most LCD 3D printers using the 405nm wavelength light source. It’s specifically designed for LCD/LED light source to achieve better printing quality. Instead of using IPA to clean up the prints, you can use tap water to wash the prints. *The water that washed the water washable resin models can not be poured directly into the sewer or sink. It should be placed under the sunlight to completely cure the remainIng resin in the water before processed to avoid environment pollutioin. This product comes with three features * Amazing Detail * No Expensive cleaners * Water washable. No detergent or alcohol required and can clean any residual stains directly with water. Precautions: Shake well before use Recommended temperature 20°C - 25°C Always wear gloves and mask to avoid direct skin contact Keep away from children, dust and direct sunlight Wash with plenty of water immediately if you get direct skin contact with resin ELEGOO Water Washable Resin Printing Setting (for Mars): Bottom Exposure: 60s Normal Exposure: 8s Resin Parameters: Hardness: 80-85 D; Viscosity (25°C): 100-350 mPa·s Liquid Density: 1.05-1.25 g/cm³ Solid Density: 1.05-1.25 g/cm³ Volumetric shrinkage: 3.72-4.24 % Flexure Strength: 40-70 Mpa Extension Strength: 30-52 Mpa Shelf Life: 2 year Wash away uncured resin using only water With Water Washable Resin, you no longer need to use expensive and dangerous solvents like acetone or alcohol to remove excess resin on your 3D prints – simply rinse with water, what is safe and free. Great Aesthetics and easy to clean Prints made with Water Washable Resin are attractive and durable, with applications ranging from secondary school projects to industry use. Printing with water washable resin is the same as printing with any other common resin and requires no additional expertise. Dissolving excess resin in water is simple and straightforward, requiring only a short period of rinsing or soaking. Compatible with DLP/SLA printers Water Washable Resin is designed to be compatible with full range of stereolithography (SLA), digital light projector (DLP) and liquid crystal display (LCD) 3D printers. High speed adhesion with faster curing time, higher precision prints and easy to take out from the printing plate. Wide Applications ELEGOO water washable resin is compatible with the LCD 3D printers using the UV light source to cure models. It has a wide range of application from board game miniatures to industrial parts and components, such as professional prototyping, science fair projects, early-exposure engineering, secondary school classrooms and so on. The only limitation is your imagination. Print now and go with ELEGOO. ELEGOO 8K Standard Resin ELEGOO 8K Water Washable Resin ELEGOO Standard Resin ELEGOO Water Washable Resin ELEGOO ABS-Like Resin ELEGOO Plant-Based Resin Max. force（KGF） 165.7±10% 103.5±10% 137.6±10% 105.10±10% 167.1±10% 116.5±10% Tensile strength（MPA） 39.06±10% 24.39±10% 24.39±10% 22.89±10% 39.39±10% 27.463±10% Deformation at the point of maximum force（mm） 5.32±10% 24.39±10% 9.863±10% 8.45±10% 6.41±10% 12.338±10% Yield point elongation(%) 5.71±10% 5.37±10% 5.545±10% 6.92±10% 6.49±10% 5.574±10% Elongation at break（%） 9.4±10% 10±10% 17.484±10% 14.91±10% 14±10% 21.811±10% Flexural strength (MPa) 48.93±10% 28.08±10% 29.826±10% 15.05±10% 40.54±10% 20.27±10% Flexural modulus (MPa) 1412.8±10% 760.53±10% 768.676±10% 327.96±10% 1089.62±10% 531.271±10% Impact strength（j/m） 80±10% 68±10% 40.03±10% 86.90±10% 205±10% 58±10% Tensile modulus(MPa) 538.4±10% 327.7±10% 424.97±10% 232.05±10% 538.9±10% 328.562±10% Reason to buy Non-Brittle and Less Odor Non-Brittle and Less Odor Low Shrinkage Water Washable, Easy to clean High Toughness Safe and no irriation

Price: 79.99 USD

Location: Chino, California

End Time: 2024-11-23T09:31:04.000Z

Shipping Cost: 0 USD